laboratory Freeze Dryers Dena Vacuum All Models

Laboratory Freeze Dryer

Dena Vacuum Industry

This device uses a solvent sublimation method to dry the heat sensitive materials. In fact, in this method, the material is first frozen and then, by placing it inside the device and creating vacuum pressure by the solvent system, the solid phase is converted to the gas phase (sublimation), and eventually the substance remains dry.

Laboratory Freeze Dryer

FD-8505/FD-5005-BT

(-85°C/-50°C)

It has a condenser drainage capacity of 5 liters per 24 hours and a temperature of -50°C .&-85°C The device consists of 3 trays for placing the product in bulk and vials, and 8 vacuum tubes for connecting balloons, flasks, falcon and erlon. From glasses The flask can be used to place the flask and vial. It should be noted that as the ratio to the volume of the material is greater, the drying time will be lower.

Condenser Capacity
14 L

Condenser Temperature
-50°C

Manifold Num
8

Laboratory Freeze Dryer( FD-8505/FD-5005-BT) ( -85°C/-50°C)

Technical Specification

Laboratory Freeze Dryer

FD-5005-HS-BT

(– 40°C)

has a capacity of 5 liters of condenser dewatering for 24 hours and a temperature of -50 ° C. The device consists of 3 thermal trays for placing the product in bulk and a vial and 8 rubber vacuum valves for connecting balloons, flasks, falcon and erlon. From the glass Flask can be used to place the flask and vial. It should be noted that as the ratio to the volume of the material is greater, the drying time will be lower. The main difference between the model and the trays is the temperature, which can be high temperature precision The device can also be used for secondary drying using thermal trays

Condenser Capacity
5 L

Condenser Temperature
(– 40°C)

Manifold Num
8

Laboratory Freeze Dryer( FD-5005-HS-BT) (– 40°C)

Technical Specification

Laboratory Freeze Dryer

FD-5010-BT

– 50°C

It has a condenser drainage capacity of 10 liters per 24 hours and a temperature of -50C. The device consists of 3 trays for placing the product in bulk and vials, and 8 vacuum tubes for connecting balloons, flasks, falcon and erlon. From glasses The flask can be used to place the flask and vial. It should be noted that as the ratio to the volume of the material is greater, the drying time will be lower.

Condenser Capacity
10 L

Condenser Temperature
-50°C

Manifold Num
8

Laboratory Freeze Dryer( FD-5010-BT) ( – 50°C)

Technical Specification